P. Tavner, L. Ran, and J. Penman, Condition monitoring of rotating electrical machines, IET, vol.56, 2008.
DOI : 10.1049/PBPO056E

H. M. Hashemian and W. C. Bean, State-of-the-Art Predictive Maintenance Techniques*, IEEE Transactions on Instrumentation and Measurement, vol.60, issue.10, pp.3480-3492, 2011.
DOI : 10.1109/TIM.2009.2036347

P. Zhang, Y. Du, T. Habetler, and B. Lu, A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors, IEEE Transactions on Industry Applications, vol.47, issue.1, pp.34-46, 2011.
DOI : 10.1109/TIA.2010.2090839

J. De, J. Rangel-magdaleno, H. Peregrina-barreto, J. M. Ramirez-cortes, P. Gomez-gil et al., FPGA-based broken bars detection on induction motors under different load using motor current signature analysis and mathematical morphology, IEEE Transactions on Instrumentation and Measurement, vol.63, issue.5, pp.1032-1040, 2014.

M. Blodt, J. Regnier, and J. Faucher, Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current Wigner distributions, IEEE Transactions on Industry Applications, vol.45, issue.6, 1991.
DOI : 10.1109/ias.2006.256735

A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, Advances in Diagnostic Techniques for Induction Machines, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4109-4126, 2008.
DOI : 10.1109/TIE.2008.2007527

F. B. Batista, P. C. Lamim-filho, R. Pederiva, and V. A. Silva, An Empirical Demodulation for Electrical Fault Detection in Induction Motors, IEEE Transactions on Instrumentation and Measurement, vol.65, issue.3, pp.559-569, 2016.
DOI : 10.1109/TIM.2015.2509398

N. Q. Hu, L. R. Xia, F. S. Gu, and G. J. Qin, A Novel Transform Demodulation Algorithm for Motor Incipient Fault Detection, IEEE Transactions on Instrumentation and Measurement, vol.60, issue.2, pp.480-487, 2011.
DOI : 10.1109/TIM.2010.2050980

M. B. Bouzid and G. Champenois, New Expressions of Symmetrical Components of the Induction Motor Under Stator Faults, IEEE Transactions on Industrial Electronics, vol.60, issue.9, pp.4093-4102, 2013.
DOI : 10.1109/TIE.2012.2235392

Y. Trachi, E. Elbouchikhi, V. Choqueuse, and M. E. Benbouzid, Induction Machines Fault Detection Based on Subspace Spectral Estimation, IEEE Transactions on Industrial Electronics, vol.63, issue.9, 2016.
DOI : 10.1109/TIE.2016.2570741
URL : https://hal.archives-ouvertes.fr/hal-01356659

G. Bouleux, Oblique projection pre-processing and TLS application for diagnosing rotor bar defects by improving power spectrum estimation, Mechanical Systems and Signal Processing, pp.301-312, 2013.
DOI : 10.1016/j.ymssp.2013.06.018
URL : https://hal.archives-ouvertes.fr/hal-01508672

A. Sadeghian, Z. Ye, and B. Wu, Online Detection of Broken Rotor Bars in Induction Motors by Wavelet Packet Decomposition and Artificial Neural Networks, IEEE Transactions on Instrumentation and Measurement, vol.58, issue.7, pp.2253-2263, 2009.
DOI : 10.1109/TIM.2009.2013743

A. Widodo and B. Yang, Support vector machine in machine condition monitoring and fault diagnosis, Mechanical Systems and Signal Processing, pp.2560-2574, 2007.
DOI : 10.1016/j.ymssp.2006.12.007

P. V. Rodríguez and A. Arkkio, Detection of stator winding fault in induction motor using fuzzy logic, Applied Soft Computing, vol.8, issue.2, pp.1112-1120, 2008.
DOI : 10.1016/j.asoc.2007.05.016

C. M. Bishop, Pattern recognition, Machine Learning, 2006.

J. Faiz, B. M. Ebrahimi, and H. A. Toliyat, Effect of Magnetic Saturation on Static and Mixed Eccentricity Fault Diagnosis in Induction Motor, IEEE Transactions on Magnetics, vol.45, issue.8, pp.3137-3144, 2009.
DOI : 10.1109/TMAG.2009.2016416

T. Yang, H. Pen, Z. Wang, and C. S. Chang, Feature Knowledge Based Fault Detection of Induction Motors Through the Analysis of Stator Current Data, IEEE Transactions on Instrumentation and Measurement, vol.65, issue.3, pp.549-558, 2016.
DOI : 10.1109/TIM.2015.2498978

A. Naha, A. K. Samanta, A. Routray, and A. K. Deb, A Method for Detecting Half-Broken Rotor Bar in Lightly Loaded Induction Motors Using Current, IEEE Transactions on Instrumentation and Measurement, vol.65, issue.7, pp.1614-1625, 2016.
DOI : 10.1109/TIM.2016.2540941

A. Garcia-perez, R. De, J. Romero-troncoso, E. Cabal-yepez, and R. A. Osornio-rios, The Application of High-Resolution Spectral Analysis for Identifying Multiple Combined Faults in Induction Motors, IEEE Transactions on Industrial Electronics, vol.58, issue.5, pp.2002-2010, 2011.
DOI : 10.1109/TIE.2010.2051398

Y. Kim, Y. Youn, D. Hwang, J. Sun, and D. Kang, High-Resolution Parameter Estimation Method to Identify Broken Rotor Bar Faults in Induction Motors, IEEE Transactions on Industrial Electronics, vol.60, issue.9, pp.4103-4117, 2013.
DOI : 10.1109/TIE.2012.2227912

E. Elbouchikhi, V. Choqueuse, and M. Benbouzid, Induction machine faults detection using stator current parametric spectral estimation, Mechanical Systems and Signal Processing, vol.52, pp.447-464, 2015.

Y. Trachi, E. Elbouchikhi, V. Choqueuse, M. Benbouzid, and T. Wang, A Novel Induction Machine Fault Detector Based on Hypothesis Testing, IEEE Transactions on Industry Applications, vol.53, issue.3, pp.3039-3048, 2017.
DOI : 10.1109/TIA.2016.2625769
URL : https://hal.archives-ouvertes.fr/hal-01531787

L. L. Scharf and B. Friedlander, Matched subspace detectors, IEEE Transactions on Signal Processing, vol.42, issue.8, pp.2146-2157, 1994.
DOI : 10.1109/78.301849

G. Joksimovic, M. Durovic, J. Penman, and N. Arthur, Dynamic simulation of dynamic eccentricity in induction machines-winding function approach, IEEE Transactions on Energy Conversion, vol.15, issue.2, pp.143-148, 2000.
DOI : 10.1109/60.866991

J. Faiz, B. M. Ebrahimi, B. Akin, and H. A. Toliyat, Finite-Element Transient Analysis of Induction Motors Under Mixed Eccentricity Fault, IEEE Transactions on Magnetics, vol.44, issue.1, pp.66-74, 2008.
DOI : 10.1109/TMAG.2007.908479

F. Immovilli, C. Bianchini, M. Cocconcelli, A. Bellini, and R. Rubini, Bearing Fault Model for Induction Motor With Externally Induced Vibration, IEEE Transactions on Industrial Electronics, vol.60, issue.8, pp.3408-3418, 2013.
DOI : 10.1109/TIE.2012.2213566

M. Blodt, P. Granjon, B. Raison, and G. Rostaing, Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring, IEEE Transactions on Industrial Electronics, vol.55, issue.4, pp.1813-1822, 2008.
DOI : 10.1109/TIE.2008.917108
URL : https://hal.archives-ouvertes.fr/hal-00270747

P. Shi, Z. Chen, Y. Vagapov, and Z. Zouaoui, A new diagnosis of broken rotor bar fault extent in three phase squirrel cage induction motor, Mechanical Systems and Signal Processing, vol.42, issue.1-2, pp.388-403, 2014.
DOI : 10.1016/j.ymssp.2013.09.002

F. Gu, T. Wang, A. Alwodai, X. Tian, Y. Shao et al., A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals, Mechanical Systems and Signal Processing, vol.50, issue.51, pp.400-413, 2015.
DOI : 10.1016/j.ymssp.2014.05.017

L. Saidi, F. Fnaiech, H. Henao, G. Capolino, and G. Cirrincione, Diagnosis of broken-bars fault in induction machines using higher order spectral analysis, ISA Transactions, vol.52, issue.1, pp.140-148, 2013.
DOI : 10.1016/j.isatra.2012.08.003

M. Rosenblatt, A CENTRAL LIMIT THEOREM AND A STRONG MIXING CONDITION, Proceedings of the National Academy of Sciences, vol.42, issue.1, pp.43-47, 1956.
DOI : 10.1073/pnas.42.1.43

P. Stoica and P. Babu, The Gaussian Data Assumption Leads to the Largest Cram??r-Rao Bound [Lecture Notes], IEEE Signal Processing Magazine, vol.28, issue.3, pp.132-133, 2011.
DOI : 10.1109/MSP.2011.940411

P. Stoica and Y. Selen, Model-order selection, IEEE Signal Processing Magazine, vol.21, issue.4, pp.36-47, 2004.
DOI : 10.1109/MSP.2004.1311138

S. Kay, Fundamentals of Statistical Signal Processing: Estimation Theory. Prentice-Hall signal processing series, p.17, 1993.

G. H. Golub and V. Pereyra, The Differentiation of Pseudo-Inverses and Nonlinear Least Squares Problems Whose Variables Separate, SIAM Journal on Numerical Analysis, vol.10, issue.2, pp.413-432, 1973.
DOI : 10.1137/0710036

R. T. Behrens and L. L. Scharf, Signal processing applications of oblique projection operators, IEEE Transactions on Signal Processing, vol.42, issue.6, pp.1413-1424, 1994.
DOI : 10.1109/78.286957
URL : https://www.engr.colostate.edu/ece/faculty/scharf/pdf/journals/ECElls00024.pdf